Step 1:
To remove the tape extension, remover fluid (solvent) must be applied ontop of the base of the tapes. Use enough remover fluid so that it can work between the tapes.
Step 2:
Using a tail comb, you can now separate the tapes (“sandwich”) from each other. If necessary, the bond remover can be used again. Please leave the removed extensions to rest until the tapes are completely dry again.
Step 3:
Now switch on the electric remover. To switch it on, you have to press the button five times quickly, and to use it, hold the button down. Place the electric remover at the bottom of the tape and quickly wipe the adhesive residue upwards. Please note that the electric remover only heats up when the button is held down. For an even and optimal result, we recommend that you do not apply any pressure when removing it and avoid pulling on the tape.
Step 4:
The extensions that have been freed of adhesive residue can now be washed and dried if necessary. You can then apply the new adhesive to the dried tapes-ins.
Your tape-in extensions are now ready to be installed again.
Please be sure to observe the safety instructions described in the enclosed instructions for use!